Weed Wacker, 35.88cc 4 Stroke Gasoline Engine Lawn Edge Grass Trimmer 2 Blade Cordless Gas Weed Eater Trimmer Brush Cutter 8500RPM for Agriculture, Gardens Family Lawn Mowing

DetailsLarge Fuel Tank: The 22&2.7 oz fuel tanks ensure long-term use without frequent refueling.Grass Baffle: It can effectively prevent the broken grass from splashing around when mowing the lawn, thus making it easier to clean up the lawn after mowing and ensuring your safety.Funnel: The red funnel makes it easier to add fuel and less likely to leak.Starting Method1. Just add four-stroke gasoline engine oil to the oil tank to the bottom thread.2. Add 93 unleaded gasoline to the fuel tank.3. Press the oil bubble to pump oil until the oil bubble is full of fuel and the fuel return pipe returns oil.4. Put the flameout switch in the "I" position (0 for flameout, I for start).5. Toggle the damper upward to close the damper (hot start does not need to close the damper).6. Pull the starter puller at a constant speed until it starts (if there is a start response after pulling 5 times but it fails to start, please pull the damper to the following to open the damper in pulling).7. After the engine starts, pull the damper to the bottom to open the damper, slowly pull the throttle trigger, lightly add oil to the throttle and test whether it is normal.ApplicationThis product is mainly used for home lawn mowing, orchard mowing, tea garden mowing, cutting rice and wheat, cutting corn stalks, reed harvesting, pond side weed removal, bushes cutting, etc., and mostly used in agriculture, forestry, landscaping, and urban greening.SpecificationColor: Red, SilverMaterial: PP, Aluminum Alloy, Manganese Steel, NylonAssembly Required: YesUsage: Side-mountedDisplacement: 35.88CCPower: 0.75kwRotation Speed: 8500r/min Idling Speed: 2800-3000r/min Engine Type: 4-stroke Gasoline Engine Carburetor Type: Diaphragm CarburetorGasoline Tank Volume: 650ml/22 OzOil Tank Volume: 80ml/2.7 OzEngine Size: 26*22*27cm/10.24*8.66*10.63inProduct Length: 1.75m/5.74ftGross Weight: 8.5kg/18.74 lbs Package Size:105*25*25 cm/41.34*9.84*9.84 inPackage Included1 * Weed Wacker1 * Oil Pot1 * Funnel1 Pair* Goggles 1 * Carrying Strap1 * English ManualAll Accessories for InstallationNotes1. The oil mixture ratio should not be wrong or deviated. Please do not use poor-quality motor oil as the matching motor oil. 2. Please check whether the blade tool is firmly installed before starting the engine, and check whether the blade tool is intact after each work. When starting the engine, personnel need to stay away from 32.81ft or more. Please wear gloves(not included) and goggles during use. 3. Please change the engine oil of the new machine every 4 hours of work and every 20 hours of work after 5 times (change the oil when the engine is warm). Please check the oil before each work to see if it is missing and add it to the right position. Fuel needs to be replenished as it is used. Refueling should be kept away from the fire source for more than 49.21ft, and open flame operation such as smoking is prohibited.4. The sponge filter inside the air filter needs to be cleaned every 50 hours of work (the cleaning cycle should be shortened when the working environment is dusty), and it can be cleaned with detergent, shampooed with water, and dried before re-installing the air filter.5. Before turning off the engine, it should idle for 1-2 minutes to facilitate the natural heat dissipation of the engine.6. The blade work head gearbox is filled with grease once every 20 hours of work to provide internal gear lubrication to reduce wear and improve life.7. The short flexible shaft and hard shaft inside the connecting disk should be withdrawn after each working cycle, greased and maintained, and then reassembled.8. Please check the engine air inlet, cylinder heat sink, and high-pressure package frequently to remove weeds and dust at the air inlet to ensure smooth air ducts and avoid pulling cylinder damage caused by high engine temperature.9. If you do not use the machine for more than 10 days, please pour out the oil in the gasoline and engine oil, and press the oil bubble to drain the fuel in the carburetor to avoid damage to the engine caused by oil deterioration. 10. If the machine is not used for a long time, please put the machine in a dry and ventilated place, and empty the fuel. Please avoid the high-pressure cap, spark plug, etc. from being unable to start due to humidity, rust, and inversion.11. When the old machine is used the next year, please check the spark plug cap for rust and corrosion first to avoid weak power generation, which makes it difficult to start. After starting, it needs to idle for 10 minutes to see if the parts are working properly.12. Work Check:Please check daily if the oil is sufficient, visually at the threaded port position, and add appropriately if it is missing.Please check daily whether the air filter is too dirty. Please use pure gasoline to clean the air filter sponge. Please check whether the throttle cable is stable in the carburetor position before work.Please check whether the blade is in good condition before work, and do not use a damaged blade. Before working, please check whether the grass baffle is in good condition, and replace the cracked and damaged grass baffle.Please check whether the screws in each part are loose, and check and tighten them one by one with a wrench.13. Please read the operating manual completely before use. And pay particular attention to the safety instructions included.

• Sturdy and Durable: This product is mainly made of PP, aluminum alloy, manganese steel, and nylon, with high hardness, high abrasion resistance, anti-corrosion, anti-rust performance, and long service life.
• High Power: The high-quality engine with 35.88CC displacement and power up to 0.75kw provides the product with super high speed (8500r/min ), thus effectively improving your working efficiency.
• Two Blade Heads: The 2T cutting edge blade head with a roller is suitable for paddy pool ridge, crop field, etc. The multi-purpose mowing head is suitable for orchards, vineyards, etc., which can avoid accidentally injuring or cutting saplings when mowing.
• High Comfort&Easy to Carry and Store: The cordless design and gasoline power source make this product more suitable for outdoor use without the need for connecting cables and electricity, with high flexibility. The adjustable position of the handle allows you to control its direction freely and conveniently, thus making mowing easier and more precise. The carrying strap allows for easy carrying while lightening the load on your hands.
• Safety Protection&Efficient Heat Dissipation: The throttle safety lock prevents accidental touching of the accelerating throttle and causing an accident to ensure the safety of users during operation. The multiple heat dissipation holes on the engine can effectively speed up the heat dissipation inside the engine, thus guaranteeing the efficient and smooth running of the engine.